| Customization: | Available |
|---|---|
| Warranty: | 2 Years |
| Shaping Mode: | Injection Mould |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
### 1. **Outer Casing**
- **Material**: Acrylonitrile Butadiene Styrene (ABS)
- **Purpose**: The outer casing provides structural support and houses the internal components. ABS is commonly used for its durability, impact resistance, and ease of molding.
### 2. **Internal Supports and Mounts**
- **Material**: Polycarbonate (PC) or ABS/PC Blend
- **Purpose**: These components hold the internal electronics in place. Polycarbonate is chosen for its high strength and heat resistance, essential for securely mounting the circuit board and other electronic parts.
### 3. **Charging Pad**
- **Material**: Thermoplastic Polyurethane (TPU)
- **Purpose**: The charging pad or surface may be made of TPU, which provides a non-slip surface for the phone. TPU is flexible, durable, and has good resistance to oils and abrasion.
### 4. **Coils Housing**
- **Material**: Polyphenylene Ether (PPE) or Polypropylene (PP)
- **Purpose**: The housing around the charging coils is typically made of PPE or PP, materials that offer electrical insulation and thermal stability.
### 5. **Connector and Port Housings**
- **Material**: Polyamide (Nylon)
- **Purpose**: The parts surrounding connectors and ports are often made from nylon, which is valued for its toughness and resistance to wear.
### 6. **Base Plate**
- **Material**: High-Density Polyethylene (HDPE)
- **Purpose**: The base plate, which provides stability to the charger, may be made from HDPE, chosen for its rigidity and impact resistance.
### 7. **Button or Indicator Covers**
- **Material**: Polycarbonate (PC) or Silicone
- **Purpose**: These covers protect buttons or indicators and allow light to pass through if made of translucent polycarbonate. Silicone is sometimes used for soft-touch buttons.
### Raw Materials Summary:
- **ABS (Acrylonitrile Butadiene Styrene)**
- **PC (Polycarbonate)**
- **TPU (Thermoplastic Polyurethane)**
- **PPE (Polyphenylene Ether)**
- **PP (Polypropylene)**
- **Nylon (Polyamide)**
- **HDPE (High-Density Polyethylene)**
- **Silicone**
These materials are selected based on their mechanical properties, ease of manufacturing, and compatibility with the wireless charging technology.
Injection Mould base: LKM Standard
Mould Steel: 1.2343/1.2344/1.2083 etc
){kind=link}